Radio Thermostat

From LinuxMCE
Jump to: navigation, search


Radio Thermostat makes several thermostats that can communicate via various wireless protocols using USNAP modules. This is an attempt to bring some of the information for these thermostats into one place.

Current Models are:

 CT-22 (Beginning to be depreciated)
 CT-30 (Also known as Filtrete 3M-50 sold in Home Depot in the U.S. with a slightly different case)
 CT-80

The USNAP communication modules include Wi-Fi, Zigbee and Z-Wave. Store Front

There is a Windows program to control it via Wi-Fi

These thermostats will connect on their own via a Wi-Fi Access Point back to their hosted control service and allow you to control your thermostat from any browser.

The documentation for the Wi-Fi communication API was released.

I also found this unofficial Cloud API documentation.

Driver is complete and waiting for sqlCVS approval. -Aviator

[1]

The template is in process but is #2235. The code below is under development:

Techstyle #193 off:

data = "{\"tmode\":" # Current mode of HVAC operation data+="0}" # Off log("tmode set data: " + data) tstat_set(data)

Techstyle #192 on:

data+="3}" # Auto log("tmode set data: " + data) tstat_set(data)

Techstyle #279 set fan: data = "{\"fmode\":" if onoff == "1" data+="2}" # Fan is always on else data+="0}" # Auto end

log("fmode set data: " + data) tstat_set(data)

Techstyle #280 set heat/cool:

data = "{\"tmode\":" if onoff == "H" data+="1" # Heat only elsif onoff == "C" data+="2" # Cool only else data+="3" # Auto end

data+="}"

log("tmode set data: " + data)

tstat_set(data)

Techstyle # 278 set temperature:

if ((value_to_assign[0,1]=="+") || (value_to_assign[0,1]=="-")) # The new setpoint is relative to the current setpoint new_temp = celcius_to_farhenheit(Float(@setpoint)).round + value_to_assign.to_i else # The new setpoint is absolute new_temp = celcius_to_farhenheit(Float(value_to_assign.to_i)).round end

# to set the temp, we must know the mode case $tstathash["tmode"].to_s when "1" data = "{\"t_heat\":" + new_temp.to_s + "}" when "2" data = "{\"t_cool\":" + new_temp.to_s + "}" end log("Set temp data: " + data) tstat_set(data)

Techstyle #373 Private method listing:

# Helper function for logging def log(word) $logFile.print(word + "\n") $logFile.flush() end

def get()

# Reconnect to the device conn_.Reconnect()

# Send the request s = "GET /tstat HTTP/1.1\r\n" s += "\r\n" conn_.Send(s)

# Wait for a reply recv = "" while(true) buff=conn_.Recv(256, 5000) if(buff.length() == 0) break end recv = recv + buff end

# Check that we got a response and try to parse through it if (recv=~ /^HTTP[^\r\n]+200\sOK.+?\r\n\r\n(.+)$/m) #parse temp $tstathash["temp"] = recv.to_s.scan(/\{\"temp\"Sad.*?),/)

#parse tmode $tstathash["tmode"] = recv.to_s.scan(/\"tmode\"Sad.*?),/)

#parse fmode $tstathash["fmode"] = recv.to_s.scan(/\"fmode\"Sad.*?),/)

#parse override $tstathash["override"] = recv.to_s.scan(/\"override\"Sad.*?),/)

#parse hold $tstathash["hold"] = recv.to_s.scan(/\"hold\"Sad.*?),/)

#parse t_heat $tstathash["t_heat"] = recv.to_s.scan(/\"t_heat\"Sad.*?),/)

#parse t_cool $tstathash["t_cool"] = recv.to_s.scan(/\"t_cool\"Sad.*?),/)

#parse time $tstathash["day"] = recv.to_s.scan(/\"day\"Sad.*?),/) $tstathash["hour"] = recv.to_s.scan(/\"hour\"Sad.*?),/) $tstathash["minute"] = recv.to_s.scan(/\"minute\"Sad.*?)\}/)

case $tstathash["tmode"].to_s when "1" $tstathash["setpoint"] = recv.to_s.scan(/\"t_heat\"Sad.*?),/) when "2" $tstathash["setpoint"] = recv.to_s.scan(/\"t_cool\"Sad.*?),/) when "3" $tstathash["setpoint"] = 32.0 #no setpoint for auto ?? else log("Error getting setpoint! mode:" + $tstathash["tmode"].to_s + " 0 is OFF") end end end

def tstat_set(data, update=true) # Reconnect to the device

conn_.Reconnect()

s = "POST /tstat HTTP/1.1\r\n" s += "Content-type: application/x-www-form-urlencoded\r\n" s += "Content-Length: " + (data.length).to_s() + "\r\n" s += "\r\n" s += data s += "\r\n"

conn_.Send(s) log("Update: " + data) # Wait for a reply recv = "" while(true) buff=conn_.Recv(256, 5000) if(buff.length() == 0) break end recv = recv + buff end log(recv.to_s) # Update the state to reflect the new situation if (update) update_state()


end

end

def update_state() # This function queries the thermostat to get the most recent state

log("Polling thermostat for updates at: " + Time.now.to_s) get()

# Get the new states new_tmode = $tstathash["tmode"] # 0-Off, 1-Heat, 2-Cool, 3-Auto #if ($tstathash["fmode"] == 2) # Always on #new_fmode = 2 # On #else # Auto/Schedule #new_fmode = 1 # Auto #end new_fmode = $tstathash["fmode"] new_setpoint = farhenheit_to_celcius(Float($tstathash["setpoint"].to_s))

new_temp = farhenheit_to_celcius(Float($tstathash["temp"].to_s)) #new_time = Time.at(results[4].to_i - Time.now.utc_offset) # Time.at creates a UTC time, wheras the thermostat reports the time in the local time zone

# Update the state and send events when necessary if (new_tmode != @tmode) log(" New mode detected : " + new_tmode.to_s) if (@tmode == 0) # The old mode was "Off", so now the thermostat is on cmd = Command.new(device_.devid_, -1001, 1, 2, 28) # On SendCommand(cmd) end if (new_tmode == 0) # The new mode is "Off", so we send the Off event: cmd = Command.new(device_.devid_, -1001, 1, 2, 29) # Off SendCommand(cmd) else # We send the Thermostat mode changed event: cmd = Command.new(device_.devid_, -1001, 1, 2, 78) cmd.params_[30] = new_tmode.to_s #(new_tmode - 1).to_s SendCommand(cmd) end @tmode = new_tmode end

if (new_fmode != @fmode) @fmode = new_fmode log(" New fan mode detected : " + new_fmode.to_s) cmd = Command.new(device_.devid_, -1001, 1, 2, 79) # Fan Mode Changed cmd.params_[30] = new_fmode.to_s # Fan mode value SendCommand(cmd) end

if (new_setpoint != @setpoint) @setpoint = new_setpoint log(" New temperature setpoint detected : " + new_setpoint.to_s) cmd = Command.new(device_.devid_, -1001, 1, 2, 27) # Thermostat Set Point Chan cmd.params_[30] = new_setpoint.to_s # The new set point SendCommand(cmd) end

if (new_temp != @temp) @temp = new_temp log(" New temperature measurement detected : " + new_temp.to_s) cmd = Command.new(device_.devid_, -1001, 1, 2, 25) # Temperature changed event cmd.params_[30] = new_temp.to_s # The ambient temperature SendCommand(cmd) end

# Check the latest system time #@time = new_time #if ((@time-Time.now).abs > 600) # Time is out of sync for more than 10 minutes #log("Thermostat's time ("+@time.to_s+") is out of sync with system time ("+Time.now.to_s+"), resynchronizing") #data="OID2.5.1=" # Current system time in seconds since Jan 1, 1970 #data+=(Time.now + Time.now.utc_offset).to_i.to_s # Time.to_i returns seconds since epoch in UTC, wheras the thermostat expects the time in seconds since epoch in the local time zone #pdp_set(data, false) #end

# Record the last time the state was checked @last_check = Time.now end

def farhenheit_to_celcius(cf) # Converts a temperatue in deci-Farhenheit into deci-degrees Celcius power = 10.00 return ((((cf - 32.0)*5.0)/9.0) * power).round / power end

def celcius_to_farhenheit(c) # Converts a temperatue in degrees Celcius into deci-Farhenheit power = 10.00 return ((((c*9.0)/5.0)+32.0) * power).round / power end

Techstyle # 351 process idle:

# Check how long it has been since we queried the thermostat now = Time.now if ((@last_check + 300) < now) # The last check was more than 5 minutes ago update_state() end

Techstyle # 350 process incoming data:

conn_.Close()

~~ # 355 process init:

# Create Log File $logFile = File.new("/var/log/pluto/RadioThermostatWiFi.log", "w") log("Starting RadioThermostatWiFi" + "\n")

@tmode = 0 @fmode = 0 @temp = 0.0 @setpoint = 0.0

# Define Hashes to store our data $tstathash = Hash.new $tstathash["hour"] = 0 $tstathash["minute"] = 0 $tstathash["day"] = 0 $tstathash["temp"] = 0.00 $tstathash["setpoint"] = 0.00 $tstathash["tmode"] = 0 $tstathash["fmode"] = 0 $tstathash["override"] = 0 $tstathash["hold"] = 0 $tstathash["t_heat"] = 0.00 $tstathash["t_cool"] = 0.00 $tstathash["tstate"] = 0 $tstathash["fstate"] = 0 $tstathash["t_type_post"] = 0


# Update the state get() @tmode = $tstathash["tmode"] @fmode = $tstathash["fmode"] @temp = $tstathash["temp"] @setpoint = $tstathash["setpoint"] @last_check = Time.now update_state()

Techstyle 356 process release:

# Close the Log File if ($logFile != nil) then $logFile.close end