qMDs are still a thing of myth, although seen occasionally in the wild they are elusive and not easily tamed. ;)
- The Raspberry Pi 2 B is an ARM based computer the size of a credit card. 4x900Mhz Cores, 1GB RAM, FastEthernet, 4xUSB, 40xGPIO
- The Raspberry Pi B is an ARM based computer the size of a credit card. 1x700Mhz Core, 256MB or 512MB RAM, FastEthernet, 2xUSB, GPIO
RPi Disked Media Director
- Your core must be LinuxMCE 1204 or higher.
- The recommended device is the RPi2. The RPi2 runs at a reasonable speed and can support all the functions of a LinuxMCE MediaDirector.
- The following Raspbian based SD cards are bootable on anything that is a Raspberry Pi Model B+ or higher. RPi1 performance is very, very, very slow.
- Download the rpi uSD card image (raspbian jessie (recommended)
- Download the rpi uSD card image (raspbian wheezy (deprecated)
- Download the rpi uSD card image (ubuntu trusty(RPi2 only and you're on your own here))
- untar the compressed file
- Install the resulting image onto an SD card, using dd on linux or win32diskimage on windows
- Ensure the RPi is connected to the internal lan of your core and boot the RPi.
- You may be prompted on existing orbiters to choose a device type MD/qMD/SqueezeOnly, do so.
- The device will automatically be created, you will need to reload your router.
- The MD may reboot, AVWizard will not appear.
- You should see the setup wizard and be asked to configure your new MD.
- The new RPi moonpi should continue installing and eventually present you with a UI1 OnScreen Orbiter.
- Please report any bugs with *very* specific (package date/svn, etc) information in a ticket.
Please see Pulse-Eight for HDMI-CEC setup information
- Overscan - currently only able to change by manually editing the config.txt file on the sdcard. (See http://elinux.org/RPiconfig)
- Overscan compensation - currently only able to change by manually editing the config.txt file on the sdcard. In /sdcard/config.txt from a booted moonpi. (See http://elinux.org/RPiconfig)
- Orbiter will automatically regenerate following a reboot and detecting a new display resolution.
- Audio settings are adjusted in webadmin: S = Stereo, H = HDMI, H3 = HDMI with passthrough capability for AC3 & DTS
- Orbiter UI1
- Photo Screen Saver
- Embedded phone
- OMX_Player will play audio and video. You must have the appropriate codecs to play MPG and VC1 media. The codecs can be purchased from the Raspberry Pi foundation.
- squeezelite can play audio
- HDMI-CEC control
- Generic Serial Devices
What does not work
- Video Overlays
NOTE: The RPi1 is no longer supported as a LinuxMCE device. If you wish to continue working on RPi1 support please contact us.
The Raspberry Pi v1 B/B+ will not be supported for much longer, but can be used as a minimal diskless Media Director within LinuxMCE. The following instructions will show how to create a diskless MD. The Raspberry Pi 2 is not compatible with the PXE method of booting.
When using the sdcard below the RPi will be overclocked using the standard Raspberry Pi foundation overclock settings. These are throttled automatically as thermally required. You are free to overclock the device further by editing the config.txt file on the sdcard.
- Your core must be LinuxMCE 1204 or higher.
- The Raspberry Pi must be a 512MB Model B (or B+). The Model A and the 256MB Model B do not have enough RAM to boot into Orbiter.
- The Raspberry Pi must be plugged into the internal side of your LinuxMCE core's network to act as a media director.
- The Raspberry Pi must be plugged in using the HDMI connector
and using HDMI sound. Set an S (for Stereo) or H (for HDMI) for the Audio Settings for the MD in webadmin.
- The Raspberry Pi will detect the boot resolution of your television and adjust itself accordingly.
- If resolution has changed since the last boot the orbiter will be regenerated.
- You may wish to have a usb keyboard or mouse for orbiter interaction. USB-UIRT/MCE Remote is also possible but must be installed using the webadmin (device detection is working but the device is not added currently).
- On the Core:
- Install the default PXE kernel package (lmce1) for a Raspberry Pi MD. This image will create an RPi MD (DT#2216) only.
- -- To be able to choose betwen an RPi MD and an RPi qMD (as well as other possible rpi Device Templates) at MD creation use this (lmce2) as the default image instead. This image will allow you to choose from multiple RPi based image including RPi MD (DT#2216), RPi qMD (DT#2281) and others.
- edit /usr/pluto/bin/Diskless_CreateTBZ.sh and enable "raspbian_armhf" as the only TARGET_TYPE, be sure to comment (use a #) any other TARGET_TYPE lines so that only this one is enabled.
- run /usr/pluto/bin/Diskless_CreateTBZ.sh to create a raspbian tarball
, and sdcard.zip file on your core.
- Get the LinuxMCE Raspberry Pi MD SD card contents.
- Download the zip
- Format the SD card for VFAT using the SD card formatter for Mac or Windows https://www.sdcard.org/downloads/formatter_4, or using mkfs.vfat on linux.
- Copy the entire contents of the sdcard zip to the newly formatted SD card, all files should be in the root directory of the card with no sub-directories.
- Download the zip
- Insert the SD card into the Raspberry Pi.
- Power up the Raspberry Pi.
- On first boot the u-boot bootloader will start, it will try to grab various different pxe files until it finally finds the default PXE kernel and initrd.
- The kernel will boot, there is a 10 second delay when activating the ethernet drivers to allow for the hardware to respond properly, this delay only occurs during the default kernel/initrd boot.
- Raspberry Pi will display "Announced ourselves to the router".
- If you have the lmce1 default image installed (see above,) the core will run Diskless_Setup to prepare an RPi MD.
- If you have the lmce2 default image installed (see above,) you will be prompted on existing orbiters to select the type of RPi device you would like installed. Once you have made your selection the core will run Diskless_Setup to prepare the device.
- The Raspberry Pi will reboot automatically once Diskless_Setup completes properly.
- You should go to an existing orbiter and 'Reload the Router' after this point. You will be prompted to do so eventually on the moonPi, if you have not already done so.
- On the second boot (called the 'FIRSTRUN') the bootloader on the sdcard will be updated to the version on the diskless image.
- The Raspberry Pi will reboot again.
- On the third boot LinuxMCE will slowly come to life. Please be patient, this can take up to 45 minutes. You will be presented with the Setup Wizard after ConfirmDependencies has finished installing all ancillary packages.