Difference between revisions of "Surveillance Cameras"

From LinuxMCE
Jump to: navigation, search
Line 1: Line 1:
 
[[Category: Cameras]]
 
[[Category: Cameras]]
 
[[Category: Security]]
 
[[Category: Security]]
[[Category: Tutorials]]
 
 
[[Category: Admin Website]]
 
[[Category: Admin Website]]
 +
 
[[Image:SurveillanceCameras.jpg|thumb|250px|Surveillance Cameras Page Admin Webiste]]<p>The best surveillance cameras are the IP based models, such as those by Panasonic.  These cameras are [[Plug&play|Plug&Play]] (just plug them into any network jack).  They do not require configuration.  Plus, many of these cameras support pan/tilt and zoom so you can control them through the [[Orbiter]].
 
[[Image:SurveillanceCameras.jpg|thumb|250px|Surveillance Cameras Page Admin Webiste]]<p>The best surveillance cameras are the IP based models, such as those by Panasonic.  These cameras are [[Plug&play|Plug&Play]] (just plug them into any network jack).  They do not require configuration.  Plus, many of these cameras support pan/tilt and zoom so you can control them through the [[Orbiter]].
  

Revision as of 01:02, 22 May 2008

Surveillance Cameras Page Admin Webiste

The best surveillance cameras are the IP based models, such as those by Panasonic. These cameras are Plug&Play (just plug them into any network jack). They do not require configuration. Plus, many of these cameras support pan/tilt and zoom so you can control them through the Orbiter.

Take a look at Cameras that work in LinuxMCE.

If you have regular analog cameras you will need to add a Linux-compatible video capture board to your Core, and then attach the cameras to it. In that case, add the video capture board on the LinuxMCE Admin Website-->Wizard-->Devices-->Interfaces page. For more detailed info see here.

Then add each surveillance cameras on this page, specifying that they are 'controlled by' the video capture board (or, rather, the Motion device wrapper).

There are also several settings for each camera. For save video, you can choose "All the time", meaning LinuxMCE will constantly record the video from the camera and save it on the Core. This can take up quite a bit of hard disk space, though. Normally you would choose "Only when motion is detected". This way LinuxMCE will only save the video when it detects there is movement, or something is changing. If you choose "Don't capture", then you will still be able to view the cameras live, but LinuxMCE will not keep an archive.

If you do want an archive, be sure to indicate how many days you want LinuxMCE to keep the archive. The default is 10 (days), meaning LinuxMCE will erase any video archive that is more than 10 days old. If you are running out of disk space on the Core you can reduce this number so there is not so much space taken up with video archives.