Difference between revisions of "Tellstick"

From LinuxMCE
Jump to: navigation, search
Line 40: Line 40:
 
# [http://192.168.80.1/ web admin] -> Show devices tree -> Telldus USB RF controller
 
# [http://192.168.80.1/ web admin] -> Show devices tree -> Telldus USB RF controller
 
# Create Child Device -> Pick device template -> ''take your pick'' (I added "Light Switch (on/off)")
 
# Create Child Device -> Pick device template -> ''take your pick'' (I added "Light Switch (on/off)")
# Device data -> Port/Channel Number -> ''HousecodeUnitcode'' -> '''save''' (codes correspond to the device ID you've set in /etc/tellstick.conf)
+
# Device data -> Port/Channel Number -> ''Device ID'' -> '''save''' (codes correspond to the Device ID you've set in /etc/tellstick.conf)
  
  

Revision as of 22:29, 7 January 2011

Version Status Date Updated Updated By
710 Unknown N/A N/A
810 Working, plug'n play supported 7 january 2011 JoakimL
1004 Unknown N/A N/A
1204 Unknown N/A N/A
1404 Unknown N/A N/A
Usage Information

Reference Info

Manufacturer website

Description

The Tellstick is a power control for cheap RF devices like the Nexa line. It's detected with LMCE's Plug-n Play. Currently only basic support is added, namely power on and power off.

Setup

The device is plug and play for LMCE, but at this point you'll need to add the driver software yourself. Install the telldus-core package as described here

Add the following lines to your /etc/apt/sources.list: deb http://download.telldus.com/debian/ stable main

If you want to try the latest beta software, also add the following: deb http://download.telldus.com/debian/ unstable main

The Telldus public key for apt-secure is added with wget -q http://download.telldus.se/debian/telldus-public.key -O- | sudo apt-key add -

The key fingerprint is 70C4 10C9 D73D 53E8 38B3 1C58 5A94 9181 E501 EA76 Telldus Technologies AB <info.tech@telldus.se>

Update the repository sudo apt-get update

To install telldus-core, do sudo apt-get install telldus-core


Adding lights

  1. web admin -> Show devices tree -> Telldus USB RF controller
  2. Create Child Device -> Pick device template -> take your pick (I added "Light Switch (on/off)")
  3. Device data -> Port/Channel Number -> Device ID -> save (codes correspond to the Device ID you've set in /etc/tellstick.conf)


Troubleshooting

See also