Vdradmin-am

From LinuxMCE
Revision as of 15:06, 3 February 2008 by Totallymaxed (Talk | contribs)

(diff) ←Older revision | view current revision (diff) | Newer revision→ (diff)
Jump to: navigation, search


vdradmin-am - The Web UI to vdr

To install and configure vdradmin-am follow the steps below from the console;

sudo su - <return>
apt-get install vdradmin-am <return>

Now edit the following conf... making sure you change the default user/password and set the 'SERVERPORT = 8001' line (set this line to a port you have opened in the LinuxMCE firewall... 8001 is just the default. We use 8888 for example);

joe /var/lib/vdradmin-am/vdradmind.conf (**I am using the Joe editor in this tutorial) <return>

Save your changes to the above conf file.

Now edit the vdradmin-am file... change the 'ENABLED="0"' to 'ENABLED="1"';

joe /etc/default/vdradmin-am <return>

Save your changes to the above file.

Now make sure vdr is running;

/etc/init.d/vdr restart <return>

and then start vdradmin-am;

/etc/init.d/vdradmin-am start <return>

Now go to a Web browser on your Core and type;

http://localhost:nnnn (**where 'nnnn' is the port No. you set in the conf)

or from another machine on your LAN type the following into the address bar in your browser;

http://192.168.80.1:nnnn (**or whatever IP your Core's LAN address is and the port you set in the conf)

Your should now see window pop up asking you to login... use the username/password you entered earlier in the conf file and click 'OK'. You browser window should now show you something like this... if you have a valid channels.conf;

Timeline View

Below is the Vdradmin-am's timeline view show scheduled/active recordings in 'red';

Timeline View

Below is the Timers view showing 5 active/running recordings happening concurrently (all on a system with a single Hauppauge Nova T500 dual tuner card)

Timers View