E-Fon (Switzerland)
From LinuxMCE
Setup for E-FON
Automatic Setup
The setup is automatic from the House Setup Wizard using the following script
/usr/pluto/bin/create_amp_efon.pl
Manual Setup
Go to 'Trunks' section
Add a IAX2 trunk
On 'Outgoing Dial Rules' add
9|.this will be the prefix to place call to E-FON network
On 'Outgoing Settings' set trunk name to
efonand peer details to
callow=alaw auth=md5 callerid="YOUR_NAME" YOUR_EFON_NUMBER canreinvite=no disallow=all host=YOUR_EFON_PROXY nat=yes qualify=no secret=YOUR_EFON_PASSWORD type=peer username=YOUR_EFON_NUMBER
On 'Incoming Settings' set usercontext to
YOUR_EFON_NUMBERand user details to
auth=md5 context=from-pstn secret=YOUR_EFON_PASSWORD type=user username=YOUR_EFON_NUMBER
On 'Registration' set registration string to
YOUR_EFON_NUMBER:YOUR_EFON_PASSWORD@YOUR_EFON_PROXY
Go to Outbound Routing section
Set route name to
efon
Set dial patterns to
9|.
Set trunk sequence to
IAX2/efon
Go to DID Routes section
Set number to
YOUR EFON NUMBER
Select the extension to ring, or select default incoming extension
Apply your changes by clicking on red line.