Merten 5071xx Connect Radio Push Button 2gang
From LinuxMCE
Version | Status | Date Updated | Updated By |
---|---|---|---|
710 | Unknown | N/A | N/A |
810 | Unknown | N/A | N/A |
1004 | Unknown | N/A | N/A |
1204 | Unknown | N/A | N/A |
1404 | Unknown | N/A | N/A |
Usage Information |
Contents
Status
Working
About
The Merten 5071xx is a 2gang Z-Wave battery powered remote controller that can be screwed or stuck to a surface.
Features
- 2gang
- special door bell mode (not yet tested)
Device setup
Device type: Controller
Inclusion/Exclusion/Node Info Frame
- triple click on connected switch
Input setup
Button | Association Group | Parameter no |
---|---|---|
Top | 1 | 0 |
Bottom | 2 | 1 |
Parameter values
Function | Value |
---|---|
Switching/Dimming/Shutters |
0 |
Switching single-surface |
4 |
Retrieve scene |
60 |
Doorbell function |
44 |
Move shutter single surface (changes direction each press) |
54 |
Lower shutter as long as button is pressed |
52 |
Raise shutter as long as button is pressed |
55 |
Factory reset
- Press button 3 times within 1.5 seconds. The LED will flash.
- Press and hold the button for about 5 seconds until the LED turns off.