View source for E-Fon (Switzerland)

<h2>Setup for <b>E-FON</b></h2>
==Automatic Setup==
The setup is automatic from the House Setup Wizard using the following script
    /usr/pluto/bin/create_amp_efon.pl
==Manual Setup==
<p>Go to 'Trunks' section</p>
<p>Add a IAX2 trunk</p>
<p>On 'Outgoing Dial Rules' add <pre>9|.</pre>
	this will be the prefix to place call to E-FON network</p>
<p>On 'Outgoing Settings' set trunk name to 
	<pre>efon</pre> and peer details to
	<pre>callow=alaw
auth=md5
callerid="YOUR_NAME" YOUR_EFON_NUMBER
canreinvite=no
disallow=all
host=YOUR_EFON_PROXY
nat=yes
qualify=no
secret=YOUR_EFON_PASSWORD
type=peer
username=YOUR_EFON_NUMBER
</pre></p>
<p>On 'Incoming Settings' set usercontext to
<pre>YOUR_EFON_NUMBER</pre> and user details to
<pre>auth=md5
context=from-pstn
secret=YOUR_EFON_PASSWORD
type=user
username=YOUR_EFON_NUMBER
</pre></p>
<p>On 'Registration' set registration string to
<pre>YOUR_EFON_NUMBER:YOUR_EFON_PASSWORD@YOUR_EFON_PROXY</pre></p>
<p>Go to Outbound Routing section</p>
<p>Set route name to <pre>efon</pre></p>
<p>Set dial patterns to <pre>9|.</pre></p>
<p>Set trunk sequence to <pre>IAX2/efon</pre></p>
<p>Go to DID Routes section</p>
<p>Set number to <pre>YOUR EFON NUMBER</pre></p>
<p>Select the extension to ring, or select default incoming extension</p>
<p>Apply your changes by clicking on red line.</p>
[[Category: Phone Lines]]