Difference between revisions of "EIB/KNX with eibd"

Revision as of 22:55, 13 September 2010

what

this page is an help one, made up to install the version of EIB that i started to make
the aim is to install an EIB version which can be uses several devices: ip, usb,...
the physical part issupported by the eibd program.

Hardware Compatibility

The eibd project has a wiki with lots of hardware compatibility information.

installing eibd

look here:

http://www.auto.tuwien.ac.at/~mkoegler/index.php/eibdeb

i link the page in case they want to modify it.. thus this page doesn't have to be modified too

installation of EIB

LinuxMCE 0810 alpha

No device data needed but you need to make sure that eibd is running. The driver is in the src/EIB-eibd directory of the 0810 branch.

linuxmce 710

you first need to get a partially compiled version of linuxmce 710, and its sources. you may have problems doing so, but if the libs are compiled there is no actual matter. see Compiling from 710 sources to get one.
when it's done, grab the file at

http://mantis.linuxmce.org/view.php?id=4299

(you need to create an account, until someone releases it )
then untar it and copy it instead of the former EIB sources.(rename them to be able to get them later, just in case).

then you must connect to lmce webadmin, and go in advanced=> templates. here modify the EIB template, so it has the following parameters:

bus type
bus address

both must be string. type must be one of:

• ft12
• bcu1
• tpuart24
• tpuart
• ip
• ipt
• bcu1s
• tpuarts
• usb

address is required for ip, ipt and usb
(type in console eibd --help for details.)

now you must compile and run sql2cpp: place yourself in the source folder, run

cd sql2cpp; make; ./sql2cpp

and you template modifications are recorded you just have to place yourself in the EIB source folder, type

make

to get the EIB programm. rename the former one in /usr/pluto/bin (such as old_EIB) and move the one you compiled instead. restart your lmce router

dont forget to modify the existing EIB so that it has good launching parameters!

Use EIBd

• Add the EIB device to your device tree
• Don't use the EIB Submenu to add devices, but use the regular lighting etc devices.
  • For a regular on/off light this is device template 37
    • In ETS you need to create two new group addresses.
      • One group address to on/off the device (let's assume 0/0/1)
      • One group address to read the status of the device (let's assume 0/0/2)
    • In the newly added device of device template 37, the channel has to be on-off-GA|status-GA, i.e. in our example it would be 0/0/1|0/0/2.
  • For a drapes switch we use the device template 68 (the drapes switch is also under lights)
    • In ETS you need to create four new group addresses.
      • One group address to open the drapes a specific percentage (let's assume 0/0/3)
      • One group address to read the open percentage (let's assume 0/0/4)
      • One group address to open/close the drapes (let's assume 0/0/5)
      • One group address to stop the drapes movements (let's assume 0/0/6)
    • In the newly added device of device template 68, the channel has to be open%-GA|open-amount-status-GA|open-close-GA|stop-movement-GA, i.e. in our example it would be 0/0/3|0/0/4|0/0/5|0/0/6

Send time/date to KNX

http://www.hoerndlein.de/cms/attachments/eibtime.pl

Links

https://www.auto.tuwien.ac.at/%7Emkoegler/index.php/eibd