Difference between revisions of "User:Techstyle"

From LinuxMCE
Jump to: navigation, search
(Outstanding Issues)
 
(50 intermediate revisions by 2 users not shown)
Line 1: Line 1:
 +
[[Category: User Setups]]
 +
[[Category: Networking Setups]]
 +
[[Category: Surveillance Camera Setups]]
 +
[[Category:X10_User Setups]]
 +
[[Category:X10]]
 +
 
{| align="right"
 
{| align="right"
 
   | __TOC__
 
   | __TOC__
 
   |}
 
   |}
[[category:User Setups]]
 
[[category:Networking Setups]]
 
  
I built my first LMCE system in the Summer of 2008, knowing nothing about Linux.  Since then I have learnt a bit about Linux and about LMCE but still have a way to go.  In November of 2008 I moved from the UK to the US.  My Hardware has ivolved over time and I have included an early network setup (UK) and the current one (US) as well as a list of the hardware I am currently using.
+
I built my first LMCE system in the Summer of 2008, knowing nothing about Linux.  Since then I have learnt a bit about Linux and about LMCE but still have a way to go.  In November of 2008 I moved from the UK to the US.  My Hardware has evolved over time, here is a list of the hardware I am currently using.
 +
 
 +
 
 +
= Software Setup =
 +
 
 +
Currently running Linux MCE 1004 RC1 upto date
 +
 
 +
 
 +
 
 +
 
 +
 
  
 
My hardware is as listed below:
 
My hardware is as listed below:
  
== Core/MD1 (Hybrid - Living Room) ==
+
= A/V Equipment =
 +
 
 +
 
 +
 
 +
 
 +
 
 +
 
 +
== Core/MD1 (Hybrid - Living Room) ==  
 +
{| align="right"
 +
  | [[Image:Living_room.JPG]]
 +
  |}
 +
 
  
 
• [[Gigabyte GA-M61SME-S2|Gigabyte GA-M61SME-S2]] with GeForce 6100 (256Mb shared), Realtek 8201 phy (10/100Mbit – eth0) LAN onboard
 
• [[Gigabyte GA-M61SME-S2|Gigabyte GA-M61SME-S2]] with GeForce 6100 (256Mb shared), Realtek 8201 phy (10/100Mbit – eth0) LAN onboard
Line 17: Line 42:
 
• 2 x 1Gb DDRII
 
• 2 x 1Gb DDRII
  
• Nvidia GeForce 8600GT 512Mb (fitted but not working – yet)
+
• Nvidia GeForce 8600GT 512Mb
{| align="right"
+
  | [[Image:Techstyle_core.JPG]]
+
  |}
+
  
 
• [http://wiki.linuxmce.org/index.php/ASUS_NX1101 ASUS NX1101] 10/100/1000 LAN card (eth1)
 
• [http://wiki.linuxmce.org/index.php/ASUS_NX1101 ASUS NX1101] 10/100/1000 LAN card (eth1)
Line 30: Line 52:
 
• Western Digital 200 Gb IDE drive (boot drive)
 
• Western Digital 200 Gb IDE drive (boot drive)
  
Hitachi 450 Gb SATAII drive
+
1.5 Gb SATAII drive
  
Bluetooth Dongle (from Techstyle UK Ltd. - http://www.techstyleuk.co.uk)
+
[http://wiki.linuxmce.org/index.php/IOGear_GBU421 IOGear GBU421 Micro Bluetooth Dongle]
  
 
• DVD Player with Lightscribe
 
• DVD Player with Lightscribe
Line 40: Line 62:
 
• [[TS820|Wireless Trackball Mouse]] (from Techstyle UK Ltd. - http://www.techstyleuk.co.uk)
 
• [[TS820|Wireless Trackball Mouse]] (from Techstyle UK Ltd. - http://www.techstyleuk.co.uk)
  
• Windows MCE Remote with IR Blaster
+
• Windows MCE Remote
  
LG RZ-37LZ55 37” LCD TV connected by RS232 (not working)
+
USB UIRT
  
Pioneer VSX-411 A/V Receiver – ‘Blasted’ by the IR Blaster (Blaster not working)
+
Sharp LC46D85UN LCD TV connected by RS232
  
CM11A X10 interface connected by RS232
+
[[Pioneer_VSX-411_AV_Receiver|Pioneer VSX-411 AV Receiver]] – ‘Blasted’ by the USB UIRT
 +
 
 +
{| align="right"
 +
  | [[Image:Techstyle_core.JPG]]
 +
  |}
 +
• [[Hauppauge_WinTV-PVR-150_MCE|Hauppauge WinTV-PVR-150 MCE]]
 +
 
 +
• LG BD550 Blu Ray Player with Netflix
 +
 
 +
• Hauppauge HD PVR
 +
 
 +
• Xbox 360 with Kinect
 +
 
 +
• Scientific Atlanta Explorer 8300HD Cable Box
  
 
• Microphone
 
• Microphone
  
  
== MD2 (Bedroom 2) ==
 
  
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
== MD2 (Master Bedroom) ==
 
  {| align="right"
 
  {| align="right"
   | [[Image:Techstyle_Bedroom.JPG]]
+
   | [[Image:Master_bed.JPG]]
 
   |}
 
   |}
 +
This MD is a Zotac ION based ITX board with a dual core Atom 330.
 +
 +
• Zotac Atom 330 ION with 2 Gb Ram
 +
 +
• Hitachi 450Gb SATAII drive
 +
 +
• Gyration Keyboard
 +
 +
• [[TS820|Wireless Trackball Mouse]] (from Techstyle UK Ltd. - http://www.techstyleuk.co.uk)
 +
 +
• LG 32LC350 LCD Screen connected by RS232
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
== MD3 (Basement) ==
 +
 +
{| align="right"
 +
  | [[Image:Basement-techstyle.JPG]]
 +
  |}
 +
 +
My Basement MD is mounted on the wall and the units case is hidden in the closet behind.  This apartment is rented, otherwise I would have fixed it to the inside wall of the closet and run the cables directly through the wall
 +
 +
 
• Matsonic MS8147C VIA KT400 Chipset Socket A, Realtek RT8100B LAN (10/100 Mbit), AC’97 audio (sound did not work)
 
• Matsonic MS8147C VIA KT400 Chipset Socket A, Realtek RT8100B LAN (10/100 Mbit), AC’97 audio (sound did not work)
  
Line 72: Line 167:
 
• Viewsonic VE500 15” LCD Monitor
 
• Viewsonic VE500 15” LCD Monitor
  
Creative Labs 5.1 Speakers
+
Altec Lansing Quadrophonic Speakers
  
Bluetooth Dongle (from Techstyle UK Ltd. - http://www.techstyleuk.co.uk)
+
Gyration Ultra GT Cordless Air mouse and Mini Keyboard
  
• [[TS820|Wireless Trackball Mouse]] (from Techstyle UK Ltd. - http://www.techstyleuk.co.uk)
 
  
== MD3 (Master Bedroom) ==
 
  
This MD is a Laptop that is connected to a network switch at various locations around the house but mainly in the Master Bedroom.
 
  
• [[Dell_Latitude-D620|Dell Latitude D620]]
+
{| align="right"
 +
  | [[Image:Techstyle_Bedroom.JPG]]
 +
  |}
 +
 
 +
 
 +
 
 +
 
 +
 
 +
 
 +
 
 +
 
 +
 
 +
 
 +
 
 +
 
 +
 
 +
 
 +
 
 +
 
 +
 
 +
 
 +
 
 +
 
 +
 
 +
 
 +
 
 +
 
 +
 
 +
 
 +
 
 +
 
 +
 
 +
 
 +
 
 +
 
 +
 
 +
 
 +
 
 +
= Mobile Orbiter =
 +
{| align="right"
 +
  | [[Image:Zt-180.JPG]]
 +
  |}
 +
• [[XDAIIi|O2 XDA IIi]] connected via WIFI (802.11b)
 +
 
 +
• [[Zenithink_ZT-180|Zenithink ZT-180]] Android Pad connected via WIFI (802.11g)
 +
 
 +
= Telecom Equipment =
 +
 
 +
• [[EP-636_SIP_Phone|EP-636 SIP Phone]]
 +
 
 +
• Tesco Internet Phone IPA1000
 +
 
 +
= Security Equipment =
 +
 
 +
• Generic USB Webcam
 +
 
 +
• Linksys USB Quickcam
 +
 
 +
= Automation Equipment =
 +
 
 +
• [[CM15A|CM15A USB X10 Controller]]
 +
 
 +
• MS14A X10 Motion Sensor x 4
 +
 
 +
• [[LM15A_Socket_Rocket|LM15A Socket Rocket]] x 5
 +
 
 +
• WS467 Wall Switch Module
 +
 
 +
• LM465 Lamp Module
 +
 
 +
• TM751 Mini Transceiver x 2
 +
 
 +
• KR19A SlimFire 2 Unit Remote
 +
 
 +
• KR22A 4 Unit Credit Card Controller
 +
 
 +
• SS13A 3 Unit + Dim RF Style Switch
 +
 
 +
•      [[DS18S20 1-Wire Temperature Sensor|DS18S20 1-Wire Temperature Sensor]] x 4 (Basement, Living Room, Master Bedroom and Inside the HVAC Ducting by the Furnace)
 +
 
 +
= Climate Equipment =
  
== MD4 (Study) ==
+
• Filtrete 3M-50 Wifi Thermostat
  
TBA
+
• 1-Wire DS9490R USB Interface
  
== Mobile Orbiter ==
+
• 1-Wire DS18S20 digital thermometer x 5
  
• [[XDAIIi|O2 XDA IIi]]O2 XDA Iii connected via WIFI (802.11b)
+
Currently the 1-Wire stuff is not working
  
== Network Equipment ==
+
= Network Equipment =
  
 
• Motorola Surfboard
 
• Motorola Surfboard
 +
 +
• Cisco-Linksys WRT310N Wireless-N Gigabit Router configured as a switch (SSID linuxmce-n)
  
 
• [[Linksys WRT54G|Linksys WRT54G]] router/WIFI Access point (SSID linuxmce)
 
• [[Linksys WRT54G|Linksys WRT54G]] router/WIFI Access point (SSID linuxmce)
  
• 2 x D-Link DGS-2205 5-port 10/100/1000 Desktop Switch
+
• 2 x [[D-Link_DGS-2205|D-Link DGS-2205]] 5-port 10/100/1000 Desktop Switch
  
 
• D-Link DL-604 router - Not Currently used
 
• D-Link DL-604 router - Not Currently used
Line 105: Line 279:
  
  
Below is my network layout, both in the UK and US
+
= Network Setup =
  
== Network Setup - UK ==
+
Below is my network layout
  
[[Image:UK_Setup.jpg]]
+
== Network Setup - (red are gigabit, blue are 100M)==
  
== Network Setup - US (red are gigabit, blue are 100M)==
+
[[Image:Techstyle_US_Setup.JPG]]
 
+
[[Image:Techstyle_US_Setup.jpg]]
+
  
 +
= Problems and Solutions =
 
== Resolved Issues ==
 
== Resolved Issues ==
  
[http://wiki.linuxmce.org/index.php/XDAIIi XDA IIi] orbiter is not working - this is fixed, a rebuild took care of this
 
  
Media Director in the Study - this is fixed, a rebuild took care of this. No media directors would work with my previous build
+
Set up Voicemail on Asterisk:
 +
I wanted to recieve e-mails when a voicemail was recieved by the system click[http://forum.linuxmce.org/index.php?topic=6793.0 here]to learn how.
  
[http://wiki.linuxmce.org/index.php/Tesco_Internet_Phone Tesco Internet Phone] - The phone would lose connection after about 60 seconds, this was resolved and an Wiki page was added with the instructions on how to over come it.
+
== Outstanding Issues ==
  
Media disapearing from the database when a MD is started - When there are multiple drives on there is a problem with the StorageRadar scriptsthe fix is detailled [http://forum.linuxmce.org/index.php?topic=7636.0 here]
+
1Resolve HDPVR Choppiness
  
Get the Microphone to work with the Creative Labs Audigy2 ZS on our core - played around with ALSAMixer and this is now working
+
2.  Get 1-Wire working
  
Set up Voicemail on Asterisk:
+
3. Get incoming calls under asterisk working
I wanted to recieve e-mails when a voicemail was recieved by the system click[http://forum.linuxmce.org/index.php?topic=6793.0 here]to learn how.
+
  
== Outstanding Issues ==
+
4.
  
1.  I can not get my NVIDIA 8600 to work, but don't really need it.
+
= General Notes =
  
2Set up Bluetooth dongles in order to get the mobiles working - Blackberry 8300 Curve, Nokia 6085
+
Sharp Aquous does not fit the screenModeline modification needed and turn of EDID.
  
3. Get the RS232 control of LG RZ-37LZ55 37” LCD TV working
+
Modeline "1920x1080@60" 148.500 1920 2008 2056 2200 1080 1084 1089 1125 +hsync +vsync
  
4.  Replace the MCE remote IR reciver/Blaster with a USB UIRT to blast IR to the VSX-411 and the Scientific Atlanta Explorer 8300 cable box
+
is the new modeline

Latest revision as of 06:53, 28 February 2013


I built my first LMCE system in the Summer of 2008, knowing nothing about Linux. Since then I have learnt a bit about Linux and about LMCE but still have a way to go. In November of 2008 I moved from the UK to the US. My Hardware has evolved over time, here is a list of the hardware I am currently using.


Software Setup

Currently running Linux MCE 1004 RC1 upto date




My hardware is as listed below:

A/V Equipment

Core/MD1 (Hybrid - Living Room)

Living room.JPG


Gigabyte GA-M61SME-S2 with GeForce 6100 (256Mb shared), Realtek 8201 phy (10/100Mbit – eth0) LAN onboard

• AMD Athlon 64 X2 5000+

• 2 x 1Gb DDRII

• Nvidia GeForce 8600GT 512Mb

ASUS NX1101 10/100/1000 LAN card (eth1)

• Creative Labs Audigy2 ZS (connected to receiver by Digital Coax)

• Samsung 1Tb SATAII drive

• Western Digital 200 Gb IDE drive (boot drive)

• 1.5 Gb SATAII drive

IOGear GBU421 Micro Bluetooth Dongle

• DVD Player with Lightscribe

• Wireless Keyboard

Wireless Trackball Mouse (from Techstyle UK Ltd. - http://www.techstyleuk.co.uk)

• Windows MCE Remote

• USB UIRT

• Sharp LC46D85UN LCD TV connected by RS232

Pioneer VSX-411 AV Receiver – ‘Blasted’ by the USB UIRT

Techstyle core.JPG

Hauppauge WinTV-PVR-150 MCE

• LG BD550 Blu Ray Player with Netflix

• Hauppauge HD PVR

• Xbox 360 with Kinect

• Scientific Atlanta Explorer 8300HD Cable Box

• Microphone















MD2 (Master Bedroom)

Master bed.JPG

This MD is a Zotac ION based ITX board with a dual core Atom 330.

• Zotac Atom 330 ION with 2 Gb Ram

• Hitachi 450Gb SATAII drive

• Gyration Keyboard

Wireless Trackball Mouse (from Techstyle UK Ltd. - http://www.techstyleuk.co.uk)

• LG 32LC350 LCD Screen connected by RS232








MD3 (Basement)

Basement-techstyle.JPG

My Basement MD is mounted on the wall and the units case is hidden in the closet behind. This apartment is rented, otherwise I would have fixed it to the inside wall of the closet and run the cables directly through the wall


• Matsonic MS8147C VIA KT400 Chipset Socket A, Realtek RT8100B LAN (10/100 Mbit), AC’97 audio (sound did not work)

• AMD Athlon XP 2600+

• 3 x 256Mb PC133 DDR

• Elsa Erazor 8x AGP (Nvidia GeForce 440MX chipset) 128Mb

• Creative Labs 5.1 sound card

• Maxtor 40Gb IDE drive

• CDRom

• Viewsonic VE500 15” LCD Monitor

• Altec Lansing Quadrophonic Speakers

• Gyration Ultra GT Cordless Air mouse and Mini Keyboard



Techstyle Bedroom.JPG


















Mobile Orbiter

Zt-180.JPG

O2 XDA IIi connected via WIFI (802.11b)

Zenithink ZT-180 Android Pad connected via WIFI (802.11g)

Telecom Equipment

EP-636 SIP Phone

• Tesco Internet Phone IPA1000

Security Equipment

• Generic USB Webcam

• Linksys USB Quickcam

Automation Equipment

CM15A USB X10 Controller

• MS14A X10 Motion Sensor x 4

LM15A Socket Rocket x 5

• WS467 Wall Switch Module

• LM465 Lamp Module

• TM751 Mini Transceiver x 2

• KR19A SlimFire 2 Unit Remote

• KR22A 4 Unit Credit Card Controller

• SS13A 3 Unit + Dim RF Style Switch

DS18S20 1-Wire Temperature Sensor x 4 (Basement, Living Room, Master Bedroom and Inside the HVAC Ducting by the Furnace)

Climate Equipment

• Filtrete 3M-50 Wifi Thermostat

• 1-Wire DS9490R USB Interface

• 1-Wire DS18S20 digital thermometer x 5

Currently the 1-Wire stuff is not working

Network Equipment

• Motorola Surfboard

• Cisco-Linksys WRT310N Wireless-N Gigabit Router configured as a switch (SSID linuxmce-n)

Linksys WRT54G router/WIFI Access point (SSID linuxmce)

• 2 x D-Link DGS-2205 5-port 10/100/1000 Desktop Switch

• D-Link DL-604 router - Not Currently used

• Netgear ADSL modem/router/WIFI Access point (SSID jasong) - Not currently used


Network Setup

Below is my network layout

Network Setup - (red are gigabit, blue are 100M)

Techstyle US Setup.JPG

Problems and Solutions

Resolved Issues

Set up Voicemail on Asterisk: I wanted to recieve e-mails when a voicemail was recieved by the system clickhereto learn how.

Outstanding Issues

1. Resolve HDPVR Choppiness

2. Get 1-Wire working

3. Get incoming calls under asterisk working

4.

General Notes

Sharp Aquous does not fit the screen. Modeline modification needed and turn of EDID.

Modeline "1920x1080@60" 148.500 1920 2008 2056 2200 1080 1084 1089 1125 +hsync +vsync

is the new modeline