Difference between revisions of "User:Techstyle"
(→Outstanding Issues) |
|||
(25 intermediate revisions by the same user not shown) | |||
Line 2: | Line 2: | ||
[[Category: Networking Setups]] | [[Category: Networking Setups]] | ||
[[Category: Surveillance Camera Setups]] | [[Category: Surveillance Camera Setups]] | ||
+ | [[Category:X10_User Setups]] | ||
+ | [[Category:X10]] | ||
{| align="right" | {| align="right" | ||
Line 7: | Line 9: | ||
|} | |} | ||
− | I built my first LMCE system in the Summer of 2008, knowing nothing about Linux. Since then I have learnt a bit about Linux and about LMCE but still have a way to go. In November of 2008 I moved from the UK to the US. My Hardware has evolved over time | + | I built my first LMCE system in the Summer of 2008, knowing nothing about Linux. Since then I have learnt a bit about Linux and about LMCE but still have a way to go. In November of 2008 I moved from the UK to the US. My Hardware has evolved over time, here is a list of the hardware I am currently using. |
= Software Setup = | = Software Setup = | ||
− | Currently running Linux MCE | + | Currently running Linux MCE 1004 RC1 upto date |
+ | |||
+ | |||
+ | |||
Line 20: | Line 25: | ||
= A/V Equipment = | = A/V Equipment = | ||
− | == Core/MD1 (Hybrid - Living Room) == | + | |
+ | |||
+ | |||
+ | |||
+ | |||
+ | == Core/MD1 (Hybrid - Living Room) == | ||
+ | {| align="right" | ||
+ | | [[Image:Living_room.JPG]] | ||
+ | |} | ||
+ | |||
• [[Gigabyte GA-M61SME-S2|Gigabyte GA-M61SME-S2]] with GeForce 6100 (256Mb shared), Realtek 8201 phy (10/100Mbit – eth0) LAN onboard | • [[Gigabyte GA-M61SME-S2|Gigabyte GA-M61SME-S2]] with GeForce 6100 (256Mb shared), Realtek 8201 phy (10/100Mbit – eth0) LAN onboard | ||
Line 30: | Line 44: | ||
• Nvidia GeForce 8600GT 512Mb | • Nvidia GeForce 8600GT 512Mb | ||
− | |||
− | |||
− | |||
• [http://wiki.linuxmce.org/index.php/ASUS_NX1101 ASUS NX1101] 10/100/1000 LAN card (eth1) | • [http://wiki.linuxmce.org/index.php/ASUS_NX1101 ASUS NX1101] 10/100/1000 LAN card (eth1) | ||
Line 41: | Line 52: | ||
• Western Digital 200 Gb IDE drive (boot drive) | • Western Digital 200 Gb IDE drive (boot drive) | ||
− | • | + | • 1.5 Gb SATAII drive |
• [http://wiki.linuxmce.org/index.php/IOGear_GBU421 IOGear GBU421 Micro Bluetooth Dongle] | • [http://wiki.linuxmce.org/index.php/IOGear_GBU421 IOGear GBU421 Micro Bluetooth Dongle] | ||
Line 55: | Line 66: | ||
• USB UIRT | • USB UIRT | ||
− | • | + | • Sharp LC46D85UN LCD TV connected by RS232 |
• [[Pioneer_VSX-411_AV_Receiver|Pioneer VSX-411 AV Receiver]] – ‘Blasted’ by the USB UIRT | • [[Pioneer_VSX-411_AV_Receiver|Pioneer VSX-411 AV Receiver]] – ‘Blasted’ by the USB UIRT | ||
+ | {| align="right" | ||
+ | | [[Image:Techstyle_core.JPG]] | ||
+ | |} | ||
• [[Hauppauge_WinTV-PVR-150_MCE|Hauppauge WinTV-PVR-150 MCE]] | • [[Hauppauge_WinTV-PVR-150_MCE|Hauppauge WinTV-PVR-150 MCE]] | ||
− | • Scientific Atlanta Explorer 8300HD Cable Box | + | • LG BD550 Blu Ray Player with Netflix |
+ | |||
+ | • Hauppauge HD PVR | ||
+ | |||
+ | • Xbox 360 with Kinect | ||
+ | |||
+ | • Scientific Atlanta Explorer 8300HD Cable Box | ||
• Microphone | • Microphone | ||
Line 68: | Line 88: | ||
− | == MD2 (Bedroom | + | |
+ | |||
+ | |||
+ | |||
+ | |||
+ | |||
+ | |||
+ | |||
+ | |||
+ | |||
+ | |||
+ | |||
+ | |||
+ | |||
+ | |||
+ | |||
+ | |||
+ | |||
+ | |||
+ | |||
+ | |||
+ | |||
+ | |||
+ | |||
+ | == MD2 (Master Bedroom) == | ||
{| align="right" | {| align="right" | ||
− | | [[Image: | + | | [[Image:Master_bed.JPG]] |
+ | |} | ||
+ | This MD is a Zotac ION based ITX board with a dual core Atom 330. | ||
+ | |||
+ | • Zotac Atom 330 ION with 2 Gb Ram | ||
+ | |||
+ | • Hitachi 450Gb SATAII drive | ||
+ | |||
+ | • Gyration Keyboard | ||
+ | |||
+ | • [[TS820|Wireless Trackball Mouse]] (from Techstyle UK Ltd. - http://www.techstyleuk.co.uk) | ||
+ | |||
+ | • LG 32LC350 LCD Screen connected by RS232 | ||
+ | |||
+ | |||
+ | |||
+ | |||
+ | |||
+ | |||
+ | |||
+ | |||
+ | |||
+ | |||
+ | |||
+ | |||
+ | |||
+ | |||
+ | |||
+ | == MD3 (Basement) == | ||
+ | |||
+ | {| align="right" | ||
+ | | [[Image:Basement-techstyle.JPG]] | ||
|} | |} | ||
− | My | + | My Basement MD is mounted on the wall and the units case is hidden in the closet behind. This apartment is rented, otherwise I would have fixed it to the inside wall of the closet and run the cables directly through the wall |
Line 96: | Line 171: | ||
• Gyration Ultra GT Cordless Air mouse and Mini Keyboard | • Gyration Ultra GT Cordless Air mouse and Mini Keyboard | ||
− | |||
− | |||
− | |||
− | = | + | {| align="right" |
+ | | [[Image:Techstyle_Bedroom.JPG]] | ||
+ | |} | ||
− | |||
− | |||
− | |||
+ | |||
+ | |||
+ | |||
+ | |||
+ | |||
+ | |||
+ | |||
+ | |||
+ | |||
+ | |||
+ | |||
+ | |||
+ | |||
+ | |||
+ | |||
+ | |||
+ | |||
+ | |||
+ | |||
+ | |||
+ | |||
+ | |||
+ | |||
+ | |||
+ | |||
+ | |||
+ | |||
+ | |||
+ | |||
+ | |||
+ | |||
+ | = Mobile Orbiter = | ||
+ | {| align="right" | ||
+ | | [[Image:Zt-180.JPG]] | ||
+ | |} | ||
• [[XDAIIi|O2 XDA IIi]] connected via WIFI (802.11b) | • [[XDAIIi|O2 XDA IIi]] connected via WIFI (802.11b) | ||
+ | |||
+ | • [[Zenithink_ZT-180|Zenithink ZT-180]] Android Pad connected via WIFI (802.11g) | ||
= Telecom Equipment = | = Telecom Equipment = | ||
Line 123: | Line 231: | ||
• Linksys USB Quickcam | • Linksys USB Quickcam | ||
+ | |||
+ | = Automation Equipment = | ||
+ | |||
+ | • [[CM15A|CM15A USB X10 Controller]] | ||
+ | |||
+ | • MS14A X10 Motion Sensor x 4 | ||
+ | |||
+ | • [[LM15A_Socket_Rocket|LM15A Socket Rocket]] x 5 | ||
+ | |||
+ | • WS467 Wall Switch Module | ||
+ | |||
+ | • LM465 Lamp Module | ||
+ | |||
+ | • TM751 Mini Transceiver x 2 | ||
+ | |||
+ | • KR19A SlimFire 2 Unit Remote | ||
+ | |||
+ | • KR22A 4 Unit Credit Card Controller | ||
+ | |||
+ | • SS13A 3 Unit + Dim RF Style Switch | ||
+ | |||
+ | • [[DS18S20 1-Wire Temperature Sensor|DS18S20 1-Wire Temperature Sensor]] x 4 (Basement, Living Room, Master Bedroom and Inside the HVAC Ducting by the Furnace) | ||
+ | |||
+ | = Climate Equipment = | ||
+ | |||
+ | • Filtrete 3M-50 Wifi Thermostat | ||
+ | |||
+ | • 1-Wire DS9490R USB Interface | ||
+ | |||
+ | • 1-Wire DS18S20 digital thermometer x 5 | ||
+ | |||
+ | Currently the 1-Wire stuff is not working | ||
= Network Equipment = | = Network Equipment = | ||
• Motorola Surfboard | • Motorola Surfboard | ||
+ | |||
+ | • Cisco-Linksys WRT310N Wireless-N Gigabit Router configured as a switch (SSID linuxmce-n) | ||
• [[Linksys WRT54G|Linksys WRT54G]] router/WIFI Access point (SSID linuxmce) | • [[Linksys WRT54G|Linksys WRT54G]] router/WIFI Access point (SSID linuxmce) | ||
Line 135: | Line 277: | ||
• Netgear ADSL modem/router/WIFI Access point (SSID jasong) - Not currently used | • Netgear ADSL modem/router/WIFI Access point (SSID jasong) - Not currently used | ||
+ | |||
= Network Setup = | = Network Setup = | ||
− | Below is my network layout | + | Below is my network layout |
− | == Network Setup - | + | == Network Setup - (red are gigabit, blue are 100M)== |
− | + | [[Image:Techstyle_US_Setup.JPG]] | |
− | + | ||
− | + | ||
− | + | ||
− | [[Image:Techstyle_US_Setup. | + | |
= Problems and Solutions = | = Problems and Solutions = | ||
== Resolved Issues == | == Resolved Issues == | ||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
Set up Voicemail on Asterisk: | Set up Voicemail on Asterisk: | ||
Line 166: | Line 296: | ||
== Outstanding Issues == | == Outstanding Issues == | ||
− | 1. | + | 1. Resolve HDPVR Choppiness |
− | 2. | + | 2. Get 1-Wire working |
− | 3. Get | + | 3. Get incoming calls under asterisk working |
− | 4. | + | 4. |
= General Notes = | = General Notes = |
Latest revision as of 06:53, 28 February 2013
I built my first LMCE system in the Summer of 2008, knowing nothing about Linux. Since then I have learnt a bit about Linux and about LMCE but still have a way to go. In November of 2008 I moved from the UK to the US. My Hardware has evolved over time, here is a list of the hardware I am currently using.
Software Setup
Currently running Linux MCE 1004 RC1 upto date
My hardware is as listed below:
A/V Equipment
Core/MD1 (Hybrid - Living Room)
• Gigabyte GA-M61SME-S2 with GeForce 6100 (256Mb shared), Realtek 8201 phy (10/100Mbit – eth0) LAN onboard
• AMD Athlon 64 X2 5000+
• 2 x 1Gb DDRII
• Nvidia GeForce 8600GT 512Mb
• ASUS NX1101 10/100/1000 LAN card (eth1)
• Creative Labs Audigy2 ZS (connected to receiver by Digital Coax)
• Samsung 1Tb SATAII drive
• Western Digital 200 Gb IDE drive (boot drive)
• 1.5 Gb SATAII drive
• IOGear GBU421 Micro Bluetooth Dongle
• DVD Player with Lightscribe
• Wireless Keyboard
• Wireless Trackball Mouse (from Techstyle UK Ltd. - http://www.techstyleuk.co.uk)
• Windows MCE Remote
• USB UIRT
• Sharp LC46D85UN LCD TV connected by RS232
• Pioneer VSX-411 AV Receiver – ‘Blasted’ by the USB UIRT
• LG BD550 Blu Ray Player with Netflix
• Hauppauge HD PVR
• Xbox 360 with Kinect
• Scientific Atlanta Explorer 8300HD Cable Box
• Microphone
MD2 (Master Bedroom)
This MD is a Zotac ION based ITX board with a dual core Atom 330.
• Zotac Atom 330 ION with 2 Gb Ram
• Hitachi 450Gb SATAII drive
• Gyration Keyboard
• Wireless Trackball Mouse (from Techstyle UK Ltd. - http://www.techstyleuk.co.uk)
• LG 32LC350 LCD Screen connected by RS232
MD3 (Basement)
My Basement MD is mounted on the wall and the units case is hidden in the closet behind. This apartment is rented, otherwise I would have fixed it to the inside wall of the closet and run the cables directly through the wall
• Matsonic MS8147C VIA KT400 Chipset Socket A, Realtek RT8100B LAN (10/100 Mbit), AC’97 audio (sound did not work)
• AMD Athlon XP 2600+
• 3 x 256Mb PC133 DDR
• Elsa Erazor 8x AGP (Nvidia GeForce 440MX chipset) 128Mb
• Creative Labs 5.1 sound card
• Maxtor 40Gb IDE drive
• CDRom
• Viewsonic VE500 15” LCD Monitor
• Altec Lansing Quadrophonic Speakers
• Gyration Ultra GT Cordless Air mouse and Mini Keyboard
Mobile Orbiter
• O2 XDA IIi connected via WIFI (802.11b)
• Zenithink ZT-180 Android Pad connected via WIFI (802.11g)
Telecom Equipment
• Tesco Internet Phone IPA1000
Security Equipment
• Generic USB Webcam
• Linksys USB Quickcam
Automation Equipment
• MS14A X10 Motion Sensor x 4
• LM15A Socket Rocket x 5
• WS467 Wall Switch Module
• LM465 Lamp Module
• TM751 Mini Transceiver x 2
• KR19A SlimFire 2 Unit Remote
• KR22A 4 Unit Credit Card Controller
• SS13A 3 Unit + Dim RF Style Switch
• DS18S20 1-Wire Temperature Sensor x 4 (Basement, Living Room, Master Bedroom and Inside the HVAC Ducting by the Furnace)
Climate Equipment
• Filtrete 3M-50 Wifi Thermostat
• 1-Wire DS9490R USB Interface
• 1-Wire DS18S20 digital thermometer x 5
Currently the 1-Wire stuff is not working
Network Equipment
• Motorola Surfboard
• Cisco-Linksys WRT310N Wireless-N Gigabit Router configured as a switch (SSID linuxmce-n)
• Linksys WRT54G router/WIFI Access point (SSID linuxmce)
• 2 x D-Link DGS-2205 5-port 10/100/1000 Desktop Switch
• D-Link DL-604 router - Not Currently used
• Netgear ADSL modem/router/WIFI Access point (SSID jasong) - Not currently used
Network Setup
Below is my network layout
Network Setup - (red are gigabit, blue are 100M)
Problems and Solutions
Resolved Issues
Set up Voicemail on Asterisk: I wanted to recieve e-mails when a voicemail was recieved by the system clickhereto learn how.
Outstanding Issues
1. Resolve HDPVR Choppiness
2. Get 1-Wire working
3. Get incoming calls under asterisk working
4.
General Notes
Sharp Aquous does not fit the screen. Modeline modification needed and turn of EDID.
Modeline "1920x1080@60" 148.500 1920 2008 2056 2200 1080 1084 1089 1125 +hsync +vsync
is the new modeline