Difference between revisions of "Z-Wave Getting Started"
Wierdbeard65 (Talk | contribs) m |
|||
| Line 3: | Line 3: | ||
So you decided to expand your LMCE system and add some Home Automation to the mix? Well the goal for this page is to let you know what you are going to need to start with and give you ideas and options to expand on in the future. | So you decided to expand your LMCE system and add some Home Automation to the mix? Well the goal for this page is to let you know what you are going to need to start with and give you ideas and options to expand on in the future. | ||
| − | + | For information about how to set up the ZWave devices in LMCE, see [[Z-Wave]]. | |
| + | |||
| + | = Interface = | ||
You are going to need some kind of method for LMCE to control your Z-Wave installation. There are currently 2 different types of interfaces, both of which us a USB stick that plugs into the LMCE Core. | You are going to need some kind of method for LMCE to control your Z-Wave installation. There are currently 2 different types of interfaces, both of which us a USB stick that plugs into the LMCE Core. | ||
Here are the Choices: | Here are the Choices: | ||
| − | == | + | == Supported == |
| − | + | ||
| − | Some examples of these | + | === USB Interface without Controller === |
| − | [[Tricklestar_300ZW-US-W|US Tricklestar]] | + | This type of z-wave USB stick acts as an interface into the Z-Wave system only. It allows LMCE to have full control. A master controller(remote) can be used in addition to LMCE to control Z-Wave devices. A separate controller may be required for some of these interfaces(those that don't support SIS mode). |
| − | [[Tricklestar_300ZW-EU-W|EU Tricklestar]] | + | |
| − | [[Seluxit_viaSENS_Homecontroller|Seluxit viaSENS Homecontroller]] | + | Some examples of these devices are:<br> |
| − | + | * [[ACT Homepro ZCS000]] | |
| + | * [[ACT Homepro ZCS010]] | ||
| + | * [[ACT Homepro ZCS101]] | ||
| + | * [[ACT Homepro ZCS201]] | ||
| + | * [[ACT Homepro ZCU000]] | ||
| + | * [[ACT Homepro ZCU010]] | ||
| + | * [[Intermatic HA22]] | ||
| + | * [[Intermatic_HA23C|Intermatic HA23C]] | ||
| + | * [[Intermatic HA20C]] | ||
| + | * [[Tricklestar_300ZW-US-W|US Tricklestar]] | ||
| + | * [[Tricklestar_300ZW-EU-W|EU Tricklestar]] | ||
| + | * [[Seluxit_viaSENS_Homecontroller|Seluxit viaSENS Homecontroller]] | ||
Make sure to check out each options individual page to see about any issues or problems you might have with the respective USB stick | Make sure to check out each options individual page to see about any issues or problems you might have with the respective USB stick | ||
| − | ==USB | + | === USB Interface with Controller === |
This type of stick not only provides the interface to LMCE, it also acts as a Z-Wave master control. There is not a physical controller with buttons on the USB stick, but it is built in so an actual master controller is not needed. | This type of stick not only provides the interface to LMCE, it also acts as a Z-Wave master control. There is not a physical controller with buttons on the USB stick, but it is built in so an actual master controller is not needed. | ||
Some examples of these sticks are:<br> | Some examples of these sticks are:<br> | ||
| − | [[MCV_Z-Wave_Dongle|Mi Casa Verde USB + Inclusion Controller in one]] | + | * [[Aeon Labs Z-Wave Interface with built-In Inclusion Remote]] |
| + | * [[MCV_Z-Wave_Dongle|Mi Casa Verde USB + Inclusion Controller in one]] | ||
| + | * [[Z~Series USB Stick with Z-Wave]] (Australian / New Zealand Z-Wave) | ||
Make sure to check out each options individual page to see about any issues or problems you might have with the respective USB stick | Make sure to check out each options individual page to see about any issues or problems you might have with the respective USB stick | ||
| + | |||
| + | == UNSUPPORTED == | ||
| + | '''those don't work''' | ||
| + | |||
| + | * [[ACT Homepro ZCU101]] | ||
| + | * [[ACT Homepro ZCU201]] | ||
=Devices= | =Devices= | ||
| Line 39: | Line 59: | ||
Dimmer Switches can replace current dimmer switches in your house along with normal switches that control light fixtures. | Dimmer Switches can replace current dimmer switches in your house along with normal switches that control light fixtures. | ||
| − | Dimmer switches should not be used for replacing switches which control a | + | Dimmer switches should not be used for replacing switches which control a ceiling fan, fluorescent bulbs or an outlet receptacle. |
==Switches== | ==Switches== | ||
| Line 46: | Line 66: | ||
The [[Wayne_Dalton_HA18WD|Wayne Dalton HA18WD]] is an example of this. | The [[Wayne_Dalton_HA18WD|Wayne Dalton HA18WD]] is an example of this. | ||
| − | Switches can replace any current switch in your home. Because they only offer On and Off control, they are best used to control fluorescent light fixtures, fixtures that include a | + | Switches can replace any current switch in your home. Because they only offer On and Off control, they are best used to control fluorescent light fixtures, fixtures that include a ceiling fan with lights operating on a single switch and switches that control an outlet receptacle. |
For the best Z-Wave and LMCE experience, it is recommended to get a dimmer switch if replacing a fixture that support incandescent bulbs. | For the best Z-Wave and LMCE experience, it is recommended to get a dimmer switch if replacing a fixture that support incandescent bulbs. | ||
| Line 64: | Line 84: | ||
==Heating\Cooling Control== | ==Heating\Cooling Control== | ||
| − | == | + | == PIR (Binary Sensor) support == |
| − | + | ||
| − | + | [[ACT Homepro Motion Detector]] | |
| − | + | [[Express Controls EZmotion]] | |
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
Revision as of 19:01, 12 May 2010
| Version | Status | Date Updated | Updated By |
|---|---|---|---|
| 710 | Unknown | N/A | N/A |
| 810 | Unknown | N/A | N/A |
| 1004 | Unknown | N/A | N/A |
| 1204 | Unknown | N/A | N/A |
| 1404 | Unknown | N/A | N/A |
| Usage Information | |||
So you decided to expand your LMCE system and add some Home Automation to the mix? Well the goal for this page is to let you know what you are going to need to start with and give you ideas and options to expand on in the future.
For information about how to set up the ZWave devices in LMCE, see Z-Wave.
Contents
Interface
You are going to need some kind of method for LMCE to control your Z-Wave installation. There are currently 2 different types of interfaces, both of which us a USB stick that plugs into the LMCE Core.
Here are the Choices:
Supported
USB Interface without Controller
This type of z-wave USB stick acts as an interface into the Z-Wave system only. It allows LMCE to have full control. A master controller(remote) can be used in addition to LMCE to control Z-Wave devices. A separate controller may be required for some of these interfaces(those that don't support SIS mode).
Some examples of these devices are:
- ACT Homepro ZCS000
- ACT Homepro ZCS010
- ACT Homepro ZCS101
- ACT Homepro ZCS201
- ACT Homepro ZCU000
- ACT Homepro ZCU010
- Intermatic HA22
- Intermatic HA23C
- Intermatic HA20C
- US Tricklestar
- EU Tricklestar
- Seluxit viaSENS Homecontroller
Make sure to check out each options individual page to see about any issues or problems you might have with the respective USB stick
USB Interface with Controller
This type of stick not only provides the interface to LMCE, it also acts as a Z-Wave master control. There is not a physical controller with buttons on the USB stick, but it is built in so an actual master controller is not needed.
Some examples of these sticks are:
- Aeon Labs Z-Wave Interface with built-In Inclusion Remote
- Mi Casa Verde USB + Inclusion Controller in one
- Z~Series USB Stick with Z-Wave (Australian / New Zealand Z-Wave)
Make sure to check out each options individual page to see about any issues or problems you might have with the respective USB stick
UNSUPPORTED
those don't work
Devices
These are some of the devices that you will use around the house with your z-wave installation or to replace current devices as you build a new Z-Wave system or grow a current one.
Keep in mind this page is for simple options someone new to Z-Wave can use for refence on how they want to proceed with their home setup. If you are not sure or need more clarification, it is always best to check with a trained professional.
Dimmers
Dimmers function similar to a light switch, however they are not simply on or off. They also cover everything in between for ultimate light control. Generally, they will only work with incandescent lights and will not function with fluorescent or compact fluorescent bulbs.
The Intermatic HA06C is an example of this.
Dimmer Switches can replace current dimmer switches in your house along with normal switches that control light fixtures.
Dimmer switches should not be used for replacing switches which control a ceiling fan, fluorescent bulbs or an outlet receptacle.
Switches
Switches are a simple switch that is either On or Off
The Wayne Dalton HA18WD is an example of this.
Switches can replace any current switch in your home. Because they only offer On and Off control, they are best used to control fluorescent light fixtures, fixtures that include a ceiling fan with lights operating on a single switch and switches that control an outlet receptacle.
For the best Z-Wave and LMCE experience, it is recommended to get a dimmer switch if replacing a fixture that support incandescent bulbs.
Receptacles
Receptacles are the outlets which you plug your stuff into.
Generally there is not a need to replace these but it can be useful for these needs:
- Turn the Receptacle on or of at specific time to conserver power
- If you do not have a permanent light fixture and a lamp is attached to this Receptacle.
If you currently have a switch controlling a Receptacle, it is not advised to replace the Receptacle with one of these unless you are eliminating the switch. Otherwise the switch will need to remain in the On position for the receptacle to operate correctly.
