Difference between revisions of "1-Wire"
m |
|||
| Line 9: | Line 9: | ||
=Currently confirmed devices working= | =Currently confirmed devices working= | ||
| − | 1-Wire Serial Adapter[http://www.hobby-boards.com/catalog/product_info.php?cPath=23&products_id=28] | + | - 1-Wire Serial Adapter[http://www.hobby-boards.com/catalog/product_info.php?cPath=23&products_id=28] |
| − | Temperature sensor[http://www.hobby-boards.com/catalog/product_info.php?cPath=24&products_id=109] | + | - Temperature sensor[http://www.hobby-boards.com/catalog/product_info.php?cPath=24&products_id=109] |
=To setup= | =To setup= | ||
Revision as of 23:24, 22 October 2011
| Version | Status | Date Updated | Updated By |
|---|---|---|---|
| 710 | Unknown | N/A | N/A |
| 810 | Unknown | N/A | N/A |
| 1004 | Working | 23 Oct 2011 | Kezza |
| 1204 | Unknown | N/A | N/A |
| 1404 | Unknown | N/A | N/A |
| Usage Information | |||
1-Wire is a device communications bus system designed by Dallas Semiconductor Corp. that provides low-speed data, signaling, and power over a single signal. LinuxMCE currently only monitors temperature but can be expanded easily.
Currently confirmed devices working
- 1-Wire Serial Adapter[1] - Temperature sensor[2]
To setup
1. Go to Show devices tree->CORE and click on Create Child Device
2. Click Pick Device Template and find 1wire device template or use ID 2161. Click Pick Device Template
3. Under Core->1wire I had to select the serial port under COM Port on PC
4. From 1wire device click Create Child Device and pick Multilevel Sensor
5. In Multilevel Sensor fill in PK_FloorplanObjectType with Temperature and Port/Channel Number with your temperature sensors address
6. Save and reload router
7. You should now see the Multilevel Sensor status look like this ON/AUTO/AUTO/25 (16.56). With 16.56 degrees.
8. The sensor can now be added under Floorplan Wizard
NOTE: This page is currently a WIP and will be expanded when more information is available. Main thing that needs to be added is how to find the address of the sensors.
