Difference between revisions of "Merten 506004 Connect Radio Transmitter FM 4gang"
From LinuxMCE
| Line 1: | Line 1: | ||
[[Category: Automation]] | [[Category: Automation]] | ||
[[Category: Lighting]] | [[Category: Lighting]] | ||
| + | [[Category: Actuator]] | ||
[[Category: ZWave]] | [[Category: ZWave]] | ||
[[Category: ZWave_switch]] | [[Category: ZWave_switch]] | ||
Revision as of 14:23, 29 July 2010
| Version | Status | Date Updated | Updated By |
|---|---|---|---|
| 710 | Unknown | N/A | N/A |
| 810 | Unknown | N/A | N/A |
| 1004 | Unknown | N/A | N/A |
| 1204 | Unknown | N/A | N/A |
| 1404 | Unknown | N/A | N/A |
| Usage Information | |||
Contents
Status
Working
About
The Merten 506004 is a 4gang Z-Wave battery powered remote controller that fits into a rocker box behind existing switches.
Features
- 4gang
- special door bell mode (not yet tested)
Device setup
Device type: Controller
Inclusion/Exclusion/Node Info Frame
- triple click on connected switch
Features
- Battery-powered radio transmitter for connecting up to 4 floating switch contacts (e.g. standard push-buttons). For the remote control of other receivers from the Merten CONNECT radio system via push-buttons from the Merten switch ranges.
- Radio features: Transmitter
- Automatic recognition of the connected devices (switches or push-buttons).
- Suitable for installation underneath push-button inserts or in empty flush-mounted boxes.
Functions:
- With CONNECT radio configuration tool:
- Switch on, switch off, toggle, dim, raise/lower shutters, push-button operation (bell), configuration as push-button or switch for all inputs.
Input setup
| Input | Association Group | Parameter no | Wire pair |
|---|---|---|---|
| 1 | 1 | 0 | red/white-red |
| 2 | 2 | 1 | green/white-green |
| 3 | 3 | 2 | brown/white-brown |
| 4 | 4 | 3 | blue/white-blue |
Parameter values
| Function | Value |
|---|---|
|
Switching/Dimming/Shutters |
0 |
|
Switching single-surface |
4 |
|
Doorbell function |
44 |
|
Move shutter single surface (changes direction each press) |
54 |
|
Lower shutter as long as button is pressed |
52 |
|
Raise shutter as long as button is pressed |
55 |
Factory reset
- Press any button 3 times within 1.5 seconds. The LED will flash.
- Press and hold the button for about 5 seconds until the LED turns off.
