LinuxMCE-0810 alpha1

LinuxMCE-0810-alpha1 is a test release build from the sources available in the LinuxMCE-0810 branch of SVN. It is missing several components of which the sources are not publicly available.

Installation

1. Install Kubuntu Intrepid, update it and enable the restricted (video) drivers if needed. (download Kubuntu 8.10 release)
2. Run aptitude update and aptitude dist-upgrade to get the latest Kubuntu updates.
3. Grab the latest installer script from here, unpack them and change into the freshly created new-installer directory.
4. Run the following scripts (as root, in order): pre-install-from-repo.sh, mce-install.sh, post-install.sh.
5. Reboot, wait for the activity to stop (see progress on console 8).

In other words, after installing Kubuntu and upgrading it etcetera:

sudo su - #This might ask for the password you specified earlier during the install of kubuntu.
wget -c http://deb.linuxmce.org/ubuntu/new-installer-alpha1.tar.bz2
tar xvf new-installer-alpha1.tar.bz2
cd new-installer
./pre-install-from-repo.sh
./mce-install.sh
./post-install.sh
reboot

Setup Diskless MD

1. On core from a terminal run sudo /usr/pluto/bin/Diskless_BuildDefaultImage.sh
2. Boot MD
3. Rundiskless setup fails, but the device gets created
4. Change md to i386 in webadmin -> rebuild image
5. On the core
   1. Set a password for root on MD
      1. chroot /usr/pluto/diskless/<##>
      2. run passwd.... enter password for root
6. On MD Switch to a terminal session
   1. Login to MD as root
   2. apt-get install nvividia-glx-177
7. From core copy valid xorg.conf from etc/X11 to /usr/pluto/diskless/##/etc/X11
8. Reboot MD. Now, the AV Wizard should come up
9. After the AV Wizard it takes a longer time to launch devices. No not need to reboot.

Note

If you don't happen to have a running xorg.conf, copy over the existing /etc/X11/xorg.conf.pluto-avwizard to /etc/X11/xorg.conf.

You have to remove a single line RgbPath from the xorg.conf file, and change the line

driver nv

to

driver nvidia

Known Problems

Upgrading pluto-storage-devices

If apt-get upgrade does cause problems with pluto-boot-scripts, do the following

dpkg -r --force-all pluto-storage-devices
apt-get install pluto-storage-devices
apt-get upgrade

VDR Installation

VDR does not yet install a working setup. Following the manual install VDR page in the wiki, needs to be followed.

VDR and sqlCVS Update

A sqlCVS update will reset the selection from VDR back to MythTV. Re-running the Setup wizard and re-selecting VDR rectifies this glitch.

For other older known problems please look at LinuxMCE-0810_alpha0

Updates

20081206 (alpha-1.1)

• pluto-vdr_2.0.0.44.0812060810
• pluto-src-vdr_2.0.0.44.0812060810
• pluto-website-admin_2.0.0.44.0812060810

20081214 (alpha-1.2)

• pluto-boot-scripts_2.0.0.44.0812140810
• pluto-website-admin_2.0.0.44.0812140810
• pluto-vdr_2.0.0.44.0812140810
• pluto-src-vdr_2.0.0.44.0812140810

20081221 (alpha-1.3)

• lirc-pluto_0.1.1
• pluto-skins-basic_2.0.0.44.0812210810
• pluto-website-admin_2.0.0.44.0812210810
• pluto-boot-scripts_2.0.0.44.0812210810

20081228 (alpha-1.4)

• asterisk-pluto_1.4.10-4
• pluto-std-plugins_2.0.0.44.0812280810
• pluto-storage-devices_2.0.0.44.0812280810
• pluto-website-admin_2.0.0.44.0812280810
• pluto-raid-tools_2.0.0.44.0812280810
• pluto-asterisk_2.0.0.44.0812280810
• pluto-avwizard-src_2.0.0.44.0812280810
• pluto-avwizard_2.0.0.44.0812280810
• pluto-boot-scripts_2.0.0.44.0812280810
• pluto-capture-card-scripts_2.0.0.44.0812280810
• pluto-dhcpd-plugin_2.0.0.44.0812280810
• mce-diskless-tools-src_2.0.0.44.0812280810
• mce-diskless-tools_2.0.0.44.0812280810

20090104 (alpha-1.5)

• libxine1-xvdr_1.0.1-5+lmce1
• libxineliboutput-fbfe_1.0.1-5+lmce1
• libxineliboutput-sxfe_1.0.1-5+lmce1
• vdr-plugin-xineliboutput_1.0.1-5+lmce1
• xineliboutput-fbfe_1.0.1-5+lmce1
• xineliboutput-sxfe_1.0.1-5+lmce1
• pluto-website-admin_2.0.0.44.0901040810

20090111 (alpha-1.6)

• pluto-website-admin_2.0.0.44.0901110810
• pluto-updatemedia_2.0.0.44.0901110810 #72 --posde
• pluto-slim-server-streamer_2.0.0.44.0901110810 #77 --posde
• pluto-boot-scripts_2.0.0.44.0901110810 #80 --posde

20090118 (upcoming)

• sql2cpp run integration posde [1]

...