DCT 700
Version | Status | Date Updated | Updated By |
---|---|---|---|
710 | Unknown | N/A | N/A |
810 | Unknown | N/A | N/A |
1004 | Unknown | N/A | N/A |
1204 | Unknown | N/A | N/A |
1404 | Unknown | N/A | N/A |
Usage Information |
This article is a stub and requires expansion |
I am trying to get my Charter Communications cable box to interface with LinuxMCE. My cable box is a DCT 700.
I found the best way to get this working is to trust that LMCE knows what it is doing. When you go through the Setup Wizard you can tell it that you have a cable box. Select Motorola from the list (there are a lot of manufacturers so it takes a while to go through the list), then cable box and the first code option- proto (something- 101 maybe?).
I had to configure mythtv to set the default channel to 03- you can do this by clicking "Computing" from the main screen, then "MythTV Setup". Navigate to the "Input Connections" and type in "/usr/pluto/bin/TuneToChannel.sh [destination device id] [source device id]". Click "Finish" and everything should work- more or less. My volume buttons are reversed currently...
The IR codes for use with the DCT 700's remote:
power 2102504100C4 2102504100C4 up 230A140051F1 230A140051F1 left 230A000051E5 230A000051E5 ok 2308040014E4 2308040014E4 right 230A100051F4 230A100051F4 down 230A000051E5 230A000051E5 volup 2102101000C4 2102101000C4 voldn 2102104000C4 2102104000C4 chup 230A150050E1 230A150050E1 chdown 230A010010F1 230A010010F1 mute 2102100400C4 2102100400C4 1 2308100000E4 2308100000E4 2 2308040000F5 2308040000F5 3 2308150000E1 2308150000E1 4 2308010040F1 2308010040F1 5 2308010040F1 2308010040F1 6 230A050040F4 230A050040F4 7 230A140040E0 230A140040E0 8 230A000050F0 230A000050F0 9 230A100050E4 230A100050E4 0 2308000000F0 2308000000F0 guide 2308150011F0 2308150011F0