WebDT 366 WPA2
From LinuxMCE
| Version | Status | Date Updated | Updated By |
|---|---|---|---|
| 710 | Unknown | N/A | N/A |
| 810 | Unknown | N/A | N/A |
| 1004 | Unknown | N/A | N/A |
| 1204 | Unknown | N/A | N/A |
| 1404 | Unknown | N/A | N/A |
| Usage Information | |||
Info
How to get WPA2 wireless on the WebDT 366
NOTE: At this stage suspend does not work as the driver doesn't support restart from suspend so won't connect to the core. A patch to the kernel should be possible but is both beyond my capabilities and my WebDT's stay on all the time.
Hardware
You will need a PCMCIA wireless card
I purchased an EDUP wireless PCMCIA card which runs the Ralink RT2500 driver which is supported out of the box with the Pad Orbiter software
There are other branded RT2500 cards out there I believe but this one is pretty cheap on ebay.
Installation
Remove the Cisco card and put the EDUP card in.
Boot and install the Pad Orbiter software.
