Implementing Arduino using Generic Serial Device

From LinuxMCE
Revision as of 19:25, 3 September 2012 by Daballiemo (Talk | contribs)

Jump to: navigation, search
Version Status Date Updated Updated By
710 Unknown N/A N/A
810 Unknown N/A N/A
1004 Working 3th September 2012 Daballiem0
1204 Unknown N/A N/A
1404 Unknown N/A N/A
Usage Information

General Info

Arduino is an open-source electronics prototyping platform based on flexible, easy-to-use hardware and software. It's intended for artists, designers, hobbyists, and anyone interested in creating interactive objects or environments.

Arduino can sense the environment by receiving input from a variety of sensors and can affect its surroundings by controlling lights, motors, and other actuators. The microcontroller on the board is programmed using the Arduino programming language (based on Wiring) and the Arduino development environment (based on Processing). Arduino projects can be stand-alone or they can communicate with software running on a computer (e.g. Flash, Processing, MaxMSP).

Arduino uno test.jpg

Arduino Uno - 1004 Setup

Prepare the Arduino Uno;

Shopping list:

Arduino Uno Ethernet Shield IDE installed on computer sketch to upload to Arduino


Prepare the LMCE Enviroment;

Setting up the Arduino to be controlled through GSD

Retrieved from "http://wiki.linuxmce.org/index.php?title=Implementing_Arduino_using_Generic_Serial_Device&oldid=31962"