TBS 6280 PCIe DVB-T2 Dual Tuner TV Cards
From LinuxMCE
A dual DVB-T/DVB-T2 PCIe card from TBS manufacturer. The manufacturer officially supports Linux, and there is on-going development of their driver, This DVB T2 PC TV card is ready with Latest Linux driver.
Contents
Overview/Features
- PCI-e x1
- Dual Tuner DVB-T/DVB-T2 card
- RF antenna pass-through
Components Used
TBC
Identification
02:00.0 Multimedia controller: Philips Semiconductors Device 7160 (rev 03) Subsystem: Device 6280:0011 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 4 bytes Interrupt: pin A routed to IRQ 16 Region 0: Memory at fda00000 (64-bit, non-prefetchable) [size=1M] Capabilities: [40] Message Signalled Interrupts: Mask- 64bit+ Queue=0/5 Enable- Address: 0000000000000000 Data: 0000 Capabilities: [50] Express (v1) Endpoint, MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <256ns, L1 <1us ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop- MaxPayload 128 bytes, MaxReadReq 128 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend- LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <4us, L1 <64us ClockPM- Suprise- LLActRep- BwNot- LnkCtl: ASPM Disabled; RCB 128 bytes Disabled- Retrain- CommClk+ ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt- Capabilities: [74] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [80] Vendor Specific Information <?> Capabilities: [100] Vendor Specific Information <?> Kernel driver in use: SAA716x TBS Kernel modules: saa716x_tbs-dvb
Making it Work
As of it is now possible to tune into DVB-T & DVB-T2 at the same time, both recorded and live, following the release of Linux Driver v120216. This version will also now compile on all Linux Kernels up till 3.2.x. Instructions for compiling/installing remain identical.
These instructions can all be carried out as a non-root user, until "make install".
- Download driver zip from TBS manufacturer
- Unzip linux-tbs-drivers_v120216.zip, and then untar/bzip linux-tbs-drivers.tar.bz2
- cd linux-tbs-drivers
- At this point, the supplied tar.bz2 is completely knackered in respect of the file permissions. To fix run
find -type d -exec chmod 755 \{\} \; find -type f -exec chmod 644 \{\} \; find -name '*.pl' -o -name '*.sh' -exec chmod 755 \{\} \;
- We need to choose 32bit or 64bit for our drivers. Run ./v4l/tbs-x86.sh for 32bit; run ./v4l/tbs-x86_64.sh for 64bit.
- We're ready to build.
make
If you get a "permission denied" message at this point, re-run
find -name '*.pl' -o -name '*.sh' -exec chmod 755 \{\} \;
- Once that has completed, you can install
sudo make install
- And reboot.
Sample kernel output
SAA716x TBS 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 SAA716x TBS 0000:02:00.0: setting latency timer to 64 DVB: registering adapter 0 frontend 0 (TurboSight TBS 62x0 DVBT/T2 frontend)... DVB: registering new adapter (SAA716x dvb adapter) DVB: registering adapter 1 frontend 0 (TurboSight TBS 62x0 DVBT/T2 frontend)...