Difference between revisions of "Category:Hardware"

From LinuxMCE
Jump to: navigation, search
(DVB Cards)
 
(13 intermediate revisions by 6 users not shown)
Line 1: Line 1:
The main article for this category is '''[[hardware]]'''. Please add any information on any hardware you have tried with LinuxMCE to the appropriate sub-category.
+
[[Category: Main]]
 +
The main article for this category is [[hardware]].
  
[[Category:DVB Cards]]
+
This is the LinuxMCE HCL (Hardware Compatibility List). This list requires your assistance to maintain. The developers only have access to a limited amount of hardware. Below, you will find a list of known working hardware. Use the "Next 200" link to go to the next page of the list.<br>
  
== Description of DVB Cards:==
+
If you have tried a piece of hardware that is not listed here and managed to get it working with LinuxMCE, please take the time to [[Add_a_page_to_the_wiki|add a page to the wiki]]. Please add <nowiki>[[Category: Hardware]]</nowiki> to the top of a page in order to have listed here.
 
+
LMCE uses mythtv as media player and some people use DVB cards as input in Mythtv.
+
(I will write a tuto for vdr if i manage to put my hands on vdr wrappers.)
+
 
+
There are different types of DVB cards they differ in the kind of signal / band / compression algorythms and some have mpeg decoders that allow the card to process all the video so the processor is free to do the rest on your host.
+
 
+
- The DVB-S cards are used to receive satellite signals K Band / PSK QPSK 8PSK etc...
+
- The DVB-T cards are used to receive terestrial signals VHF/UHF
+
- The DVB-C cards are used to receive coaxial cable tv
+
 
+
Those cards should work with lmce as long as they are supported by the Linux kernel.
+
+
First check dmesg | grep dvb should tell you if the card is seen properly and also tell you wich device the card uses (/dev/dvb/adapter0/frontend0 and so forth.)
+
 
+
In order to use the card you will need to scan for channels.
+
 
+
To do so you will need to install dvb-utils packages:
+
 
+
sudo apt-get install dvb-utils
+
 
+
sudo scan /usr/share/doc/dvb-utils/examples/scan/dvb-s/Astra-19.2 >channels.conf
+
 
+
If you dont want any radio or encrypted channels:
+
 
+
sudo scan /usr/share/doc/dvb-utils/examples/scan/dvb-s/Astra-19.2 -x0 -t1 >channels.conf
+
 
+
If you are getting to few channels:
+
 
+
sudo scan /usr/share/doc/dvb-utils/examples/scan/dvb-s/Astra-19.2 -x0 -t1 -n >channels.conf
+
+
 
+
Hint: if you can't get any signal lock try to get the frequencies looking on your tv or satellite receiver then input them in the /usr/share/doc/dvb-utils/../..........
+
 
+
You can even make your own file copying the model in the dvb-x category.
+
 
+
Once you have populated the channels.conf file you can setup mythtv tu use your card
+
(mythtv will tell you if it sees the DVB card)
+
 
+
Then in the channel scan section use the channels.conf method and put the path to your file.
+
 
+
If mythtv finishes the scan then you can fire up your MD to watch tv.
+
 
+
Please feel free to drop suggestions if you feel something is wrong here.
+

Latest revision as of 08:29, 14 June 2015

The main article for this category is hardware.

This is the LinuxMCE HCL (Hardware Compatibility List). This list requires your assistance to maintain. The developers only have access to a limited amount of hardware. Below, you will find a list of known working hardware. Use the "Next 200" link to go to the next page of the list.

If you have tried a piece of hardware that is not listed here and managed to get it working with LinuxMCE, please take the time to add a page to the wiki. Please add [[Category: Hardware]] to the top of a page in order to have listed here.

Articles in category "Hardware"

The following 200 pages are in this category, out of 392 total.

(previous 200) (next 200)

 

1

3

A

B

B cont.

C

D

E

E cont.

F

G

H

(previous 200) (next 200)